Flanger Page 1: Voice 1 - Rocktron Prophesy II User Manual

signals (here referred to as Voice 1 and Voice 2), then modulating these delayed signals
so that, when summed back together with the direct signal, phase cancellations will
occur at some frequencies while peaks in the response will occur at others.

Flanger Page 1: Voice 1

3 6
Flanging involves splitting the input signal into at least two individual delayed
FLANGE
122
O N
FLANGE The FLANGE parameter determines whether the flanger is active for the current
preset. (Off, On)
LVL1 The LEVEL1 parameter determines the volume of Voice 1 relative to Voice 2. (Off
to +6.0)
PAN1 The PAN1 parameter allows you to pan Voice 1 to the left or right channel. (Left
to Right)
DPTH1 The DEPTH 1 parameter adjusts the amount of modulation of Voice 1. Lower
DEPTH settings produce more subtle effects, while higher settings will result in a
more drastic effect. (0 to 100)
RATE1 The RATE 1 parameter determines the speed at which Voice 1 is modulated. (0 to
253)
LVL1 PAN1 DPTH1 RATE1
+ 3.0 L<30 70 100