Preamp Page 2: Channel/Voicing; Preamp Page 3: Pre Eq - Rocktron Prophesy II User Manual

Preamp Page 2: Channel/Voicing

Preamp Page 3: Pre EQ

Considerable tone variations can be achieved by modifying these pre-distort EQ
parameters.
3 0
CHANNEL VOICING TYPE
122
1 <--CLEAN AMERICAN
CHANNEL The CHANNEL parameter allows you to select any of the four preamp
channels (1-4) for the current preset. The name of each channel is displayed
under the VOICING TYPE heading when selected. Available preamp
channels are Clean American, Texas Blues, Vintage British and Mega Drive.
V-CN The V-CN parameter defines a dedicated MIDI controller number for the
Prophesy's volume. A MIDI expression pedal can be configured to match
this number and act as a volume pedal. (0-120)
RUN STAT The RUN STAT parameter determines the current running status of the
volume pedal. If this parameter is set to "ON" and a preset is recalled, the
Prophesy will set the volume of the recalled preset to the last value it had
received from the volume pedal. When set to "OFF", the Prophesy will recall
the stored preset volume regardless of the current volume pedal position.
Once a preset has been recalled, the volume pedal can be used to change the
volume.
V-PED The V-PED parameter displays the volume that will be used when the preset
is recalled and the RUN STAT parameter is set to "OFF".
The PRE EQ pages allow you to shape the tone prior to the distortion stage.
PRELF
122
+ 1.5
V-CN RUN STAT
17 OFF
PRELFF P R E M F PREMFF -> B W
101Hz + 7.0 1414Hz 1 . 7
V-PED
127
BRIGHT
OFF