Tapbtn; Quant; T-Ctrnum - Rocktron Prophesy II User Manual

Tap Button Page

TAPBTN

Q U A N T

T-CTRNUM

T-LED
122
B O T H 1/4 NOTE 15 OFF
TAPBTN The TAPBTN parameter allows you to select whether the front panel Tap
button, momentary footswitch, or MIDI controller affects the Delay time,
the Tremolo rate or both simultaneously. (Delay, Trem, Both)

QUANT

The QUANTize parameter determines how the Tap function sets the delay
time and the tremolo rate. For example, when set to "1/4 NOTE", the delay
time will be set to match the same tempo that you tapped. When set to "1/
8 NOTE", the delay time will be twice as fast as the tempo that you tap.
Likewise, the Tremolo rate may be quantized in the same fashion, allowing
one to quickly get the proper tremolo rate for the tempo of a particular song.
What if I want a 1/16 note? Simply multiply a 1/8 note tapped speed or rate
value by 2 and adjust it by hand! (1/8 Note, 1/4 Note)
T-CTRNUM This parameter sets a dedicated controller number for the Tap function,
allowing you to set delay times from a MIDI controller. (0 - 119)
T-LED When set to "ON", this parameter causes the front panel TAP button to flash
at a speed based on the current delay setting. This feature can be disabled by
setting this parameter to "OFF". (Off, On)
6 1