Chorus Pages 3 And 4: Voices 3 And 4 - Rocktron Prophesy II User Manual

Chorus Pages 3 and 4: Voices 3 and 4

122
REGEN L (page 3)
REGEN R (page 4)
LVL3 and 4
PAN3 and 4
DLY3 and 4
DEPTH3 and 4
RATE3 and 4
REGEN L LVL3 PAN3 DLY3
OFF OFF 58>R 0
The REGENERATION LEFT parameter determines how much of the delayed
output signal is fed back into the left input. Note that voice 3 has a REGEN L
parameter, while voice 4 has a REGEN R for providing regeneration through the
right input. (Off, -42.0 to +6.0)
The LEVEL parameter determines the volume of the current voice relative to the
other chorus voices. (Off, -42.0 to +6.0)
The PAN parameter allows for the current voice to be panned to the left or right
channel. (Left to Right)
The DELAY parameter allows you to select the minimum delay time (in
milliseconds) for the current voice. This delayed signal is detuned and modulated
to produce the chorus effect. Shorter delay times will result in a tighter sounding
chorused signal, while longer delay times will produce a larger ambient effect. (0
to 100)
The DEPTH parameter adjusts the amount of modulation of the current voice. A
lower depth setting will produce a more subtle detune effect, while a higher
setting results in a more extreme detuning. (0 to 58)
The RATE parameter determines the sweep speed (or the speed at which each
voice is modulated). Lower parameter settings provide slower speeds, while
higher settings result in faster speeds. (0 to 253)
DEPTH3 RATE3
0 0
3 9