Mixer Page 5: Reverb Mix Levels - Rocktron Prophesy II User Manual

Mixer Page 5: Reverb Mix Levels

5 6
REV IN
122
62>E
REV IN The REVERB INPUT parameter determines how much of the signal applied
to the reverb section is direct signal, and how much is effect signal. (100%
Direct to 100% Effect)
REV OUT The REVERB OUTPUT parameter determines the output level of the reverb
effect. (Off, -42.0 to +6.0)
DIR The DIR parameter determines the overall output level of the direct signal.
(Off, -42.0 to +6.0)
DPAN The DPAN parameter is used to pan the direct signal to the left or right
Prophesy output. (100% Left to 100% Right)
OUTPUT The OUTPUT parameter determines whether the output of the Prophesy is
a stereo (left and right) signal or two mono signals.
PLEVEL The PRESET LEVEL parameter determines the overall output level of the
current preset relative to the other Prophesy presets.
REV OUT DIR D P A N OUTPUT
- 5.5 - 1.0 L<37 STEREO
PLEVEL
25