The Mixer parameters are included in all presets. However, the parameter values
stored in these pages pertain only to the currently-recalled preset. This internal digital
mixer occupies five pages, and allows you to control the signal levels pertaining to each
preset's effect configuration.
Mixer Page 1: Pre Effect Mix Levels
122
PRE MIX
PRE EFX OUT
EFFECT USED
(PRE MIX)
(PRE EFX OUT)
(EFFECT USED)
57>E
- 3.0
The PRE MIX parameter determines the direct/effect mix from the Pre Effect
block. (100% Direct to 100% Effect)
The EFX OUTPUT parameter determines the overall level that is output
from the Pre Effect block. Note that this parameter acts like an overall
volume control, and affects the signal level for the remainder of the signal
path. Please refer to the Block Diagram shown at the end of Section 5 for a
visual indication of how this parameter is used in the signal path. (Off, -42.0
to +6.0)
The EFFECT USED parameter indicates the effect that is currently assigned
to the Pre Effect location, if any. (Not adjustable)
PHASER
5 3