Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Rocktron Rampage Bass 15
Summary of Contents for Rocktron Rampage Bass 15
- Page 1 Instruction Manual...
-
Page 2: Specifications
Your Rocktron Bass15 Bass Amplifier has been tested and complies with the following Standards and Directives as set forth by the European Union: Standard(s): This means that this product has been designed to meet stringent guidelines on how much RF energy it can emit, and that it should be immune from other sources of interference when properly used. -
Page 3: Operating Temperature
NOTE: IT IS VERY IMPORTANT THAT YOU READ THIS SECTION TO PROVIDE YEARS OF TROUBLE FREE USE. THIS UNIT REQUIRES CAREFUL HANDLING. • All warnings on this equipment and in the operating instructions should be adhered to and all operating instructions should be followed. •... -
Page 4: Front Panel
Input Jack Using a standard guitar cable with a 1/4” jack - plug your bass into this jack. Master Volume Control The control adjusts the overall output of the amplifier. When turning the ampli- fier on, make sure this control is turned all the way down to zero. Bass Control This control adjusts the amount of low-end frequencies applied to the signal. -
Page 5: Back Panel
Back Panel Power Cable Connection Using the included power cable connect the amplifier to a standard wall outlet. See”Fuse Replacement” section for details on how to replace the fuse. -
Page 6: Fuse Replacement
Fuse Replacement We recommend that you use an authorized repair person to change the fuse in this unit. To access the fuse, first power down the unit and unplug the cable from the wall outlet and the amplifier. Using a small screw driver, open the fuse tray by prying open the small tab as shown in the drawing above. - Page 8 Rocktron - A Division of GHS Corporation 2813 Wilber Ave Battle Creek MI 49037 Tel: 1-269-968-3351 Fax: 1-269-968-6913 www.rocktron.com Rev. 022908...