Advertisement
•
Keep Alive Interval (ms)—The time interval (in milliseconds) for sending the Keep Alive
Message to the automation device.
8. Select Save.
The added device is displayed in the list of auditorium devices in the Macro Editor.
Modifying automation device settings
Modify the settings of automation devices when parameters such as the username or password
change. If the settings are not updated, the automation device might not be able to communicate with
other theater hardware or be controlled remotely.
1. In the left navigation menu, select Automation > My Auditorium Devices.
2. In the left pane, select an automation device.
3. Modify these fields:
•
IP Address—The IP address of the automation device.
•
Port—The port used by the automation device to communicate with the projector.
•
Username—The username used to access the automation device.
•
Password—The password used to access the automation device.
•
Keep Alive Message—The message value sent to the automation device to make sure
the projector is not disconnected when inactive.
•
Keep Alive Interval (ms)—The time interval (in milliseconds) for sending the Keep Alive
Message to the automation device.
4. Select Save.
Removing an automation device from your
auditorium
Remove an automation device when it is no longer required, or it has been physically removed from
the theater.
1. In the left navigation menu, select Automation > My Auditorium Devices.
2. In the left pane, select an automation device.
3. Select Delete.
4. To confirm the deletion, select Delete.
Creating, editing, and deleting playlist triggers
Playlist triggers are configured and managed through the GDC Integrated Media Block (IMB).
For more information, refer to the documentation provided with your IMB device.
CineLife+ User Guide
020-103073-11 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Automation
94
Advertisement
