Advertisement
1. Using Christie Mystique, create the required warp file.
2. Using Mystique, upload the warp file to the projector.
3. On the projector touch panel, navigate to Image Settings > Warp File Setup.
4. To activate the warp file, find the file name in the Warp File list and select Activate.
If you no longer require a warp file, remove it by selecting Image Settings > Warp File
Setup. Find the warp file in the list and select Delete.
CineLife+ User Guide
020-103073-11 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Adjusting the image size and position
80
Advertisement
