Advertisement
Field Name
3D Light Source File
2D MCGD File
3D MCGD Left Eye File
TCGD File
Screen File
Gamma File
3D File
Source File
Christie Pureformity
™
Color
Correction File
Warp File
4. Select Save.
Adding a channel for DisplayPort input
Create a channel to store customized projector settings for input devices connected to the HDMI port.
1. In the left navigation menu, select Channel Setup.
2. Select + Add Channel.
3. Complete these fields:
Field Name
Name
Input Type
Data Format
Scan Type
3D Sync Input Mode
CineLife+ User Guide
020-103073-11 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
3D light source file associated with the channel. Any changes made to the
settings are applied to all channels using this file.
Measured Color Gamut Data file associated with the 2D image.
Measured Color Gamut Data file associated with the left 3D image.
Target Color Gamut Data file associated with the channel.
Screen type, masking, cropping, and lens settings for the channel.
Gamma correction required for the proper tonal range of the source material.
3D settings files associated with the channel.
Resolution and aspect ratio for the channel.
Color correction file associated with the channel.
Bypass (Default)
Warp file associated with the channel.
Bypass (Default)
Description
Channel name
Select the input signal sources from one of the following:
• DisplayPort Input - 1
• DisplayPort Input - 2
• DisplayPort Input 3D LR
Bit-depth, sampling format, and color space of the input signal are
automatically determined from the metadata carried in the source.
Auto (Default)
Scanning format of the input signal (interlaced or progressive) is automatically
determined from the metadata carried in the source or by measuring scanning
parameters of the source.
Auto (Default)
Specifies whether a specific frame of input data has left-eye or right-eye data.
Select one of the following:
Working with channels
66
Advertisement
