Advertisement
Adjusting the image
size and position
Learn how to enable and modify projector image settings.
Intelligent Lens System (ILS)
The Intelligent Lens System
Warping is disabled when entering the ILS Setup page.
Activating the Intelligent Lens System
Activate the Intelligent Lens System
On CineLife+ projectors, the ILS is enabled by default.
1. In the left navigation menu, select Service Setup > Preferences.
2. Select Lens/ILS.
3. In the right pane, select the ILS Installed slider.
The color of the slider changes to green to indicate the ILS is active.
Creating a new ILS file
Create an Intelligent Lens System
1. In the left navigation menu, select Image Settings > ILS File Setup.
2. Select Create ILS File.
3. Enter a name for the ILS file and select Create.
4. In the Lens position area, select the forward, backward, left, or right arrow icons to move the
position of the image on the screen.
5. In the Focus area, select Up (
6. In the Zoom area, select Up (
7. Select Save.
CineLife+ User Guide
020-103073-11 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
™
(ILS) automatically recognizes and calibrates a lens.
(ILS) to automatically adjust the position of the lens.
™
(ILS) file to set the X, Y, zoom, and focus positions of the lens.
™
) or Down (
) or Down (
) to increase or decrease image focus.
) to increase or decrease image zoom.
74
Advertisement
