Advertisement
Command
Set Main Volume
Set Video Input Channel
Active Trigger Input
Creating a macro
Create a macro to make the projector perform a specific list of actions.
1. In the left navigation menu, select Automation > Macro Editor.
2. In the right pane, select Create New Macro.
3. Enter a name for the macro.
The Name field cannot contain spaces.
4. Select the macro type.
5. Select Create.
6. Add an action item to the macro:
a) In the left pane, expand the My Auditorium list.
b) Under Automation or Projector, select the action item.
7. To save the macro, select Save.
8. To test the macro, select Test.
Running a macro
Run a macro to have the projector perform a specific list of actions.
1. In the right toolbar of the touch panel, select Run Macro.
2. Select a macro.
Adding an action item to an existing macro
Add an action item to a macro to have the projector perform an additional action when the macro
runs.
1. In the left navigation menu, select Automation > Macro Editor.
2. In the top right pane, select a macro from the list.
3. Add an action item to the macro:
a) In the left pane, expand the My Auditorium list.
b) Under Automation, Playback, or Projector, select the action item.
CineLife+ User Guide
020-103073-11 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
Sets the overall volume for the system.
Sets the video input channel.
Controls eight SKA-3D presets.
To use this command, a trigger input must be associated with each of the SKA-3D
presets
Automation
92
Advertisement
