Advertisement
Specification
Resolution
SMPTE 2048-1-2011
4096x2160
Am1:2016
SMPTE 2048-1-2011
4096x2160
Am1:2016
SMPTE 2048-1-2011
4096x2160
Am1:2016
HDMI video source connection from an Integrated Media
Block (IMB)
The projector can accept digital video data from HDMI sources connected to applicable Integrated
Media Block (IMB) devices. The input configurations supported are determined by the IMB device
directly.
Contact Christie Technical Support to learn which IMB devices provide HDMI source selection from the
projector user interface.
HDMI input selection directly from the IMB may also be possible using the IMB user interface. The
input configurations supported are determined by the IMB make and model.
SDI video source connection from an Integrated Media Block
(IMB)
The projector can accept digital video data from SDI sources connected to applicable Integrated Media
Block (IMB) devices.
The input configurations supported are determined by the IMB device directly. Contact Christie
Technical Support to learn which IMB devices provide SDI source selection from the projector user
interface.
SDI input selection directly from the IMB may also be possible using the IMB user interface. The input
configurations supported are determined by the IMB make and model.
GPIO connector
The Generic Purpose Input Output (GPIO) connector provides a flexible method of interfacing with the
projector. 18 GPIO pins are available on the GPIO connector. Two other pins are reserved for ground
and power.
The GPIO connector is located on the input panel (M in the Video Input panel image (on page 25)).
CineLife+ User Guide
020-103073-11 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Frame rate (per
Color format
eye)
48.0x2
X'Y'Z' (4:4:4)
50.0x2
X'Y'Z' (4:4:4)
60.0x2
X'Y'Z' (4:4:4)
Video Input panel
Bit depth
12-bits
12-bits
12-bits
40
Advertisement
