Advertisement
Automatically calibrating the ILS
Use the Auto Calibrate feature of the Intelligent Lens System
backlash, and to determine the movement range for the currently installed lens.
1. In the left navigation menu, select Image Settings > ILS File Setup.
2. Select Auto Calibrate.
3. In the confirmation dialog, select Continue.
Editing ILS file settings
Edit Intelligent Lens System
1. In the left navigation menu, select Image Settings > ILS File Setup.
2. In the ILS File list, select an ILS file.
3. Modify the ILS file settings.
4. Select Save.
Copying existing ILS file settings
To duplicate Intelligent Lens System
a new ILS file.
1. In the left navigation menu, select Image Settings > ILS File Setup.
2. In the ILS File list, select the ILS file you want to copy.
3. Select Save As.
4. Enter a name for the ILS file and select Save.
Deleting an ILS file
Delete an Intelligent Lens System
1. In the left navigation menu, select Image Settings > ILS File Setup.
2. In the ILS File list, select the ILS file you want to delete.
3. Select Delete.
4. To confirm the deletion, select Delete.
Resetting the lens
Use the Reset Lens feature to have the Intelligent Lens System
that allow the ILS to compensate for drift over time, or move to its proper position after it has been
manually adjusted.
1. In the left navigation menu, select Image Settings > ILS File Setup.
2. Select Reset Lens.
3. In the confirmation dialog, select Continue.
CineLife+ User Guide
020-103073-11 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
™
(ILS) file settings when content requirements change.
(ILS) file settings quickly, copy the settings of an existing file to
™
™
(ILS) file when it is no longer required.
Adjusting the image size and position
(ILS) to find and compensate for motor
™
™
(ILS) find the home position flags
75
Advertisement
