Advertisement
Managing color setting
files
Use the procedures in this section to manage color setting files. When associated with a channel, a
color setting file defines the color output for the content.
Creating a MCGD file
Create Measured Color Gamut Data (MCGD) files to correct on-screen colors. A colorimeter is required
to complete this procedure.
1. Activate the channel using the light source file the MCGD file is being created for.
2. Turn on the light source and allow it to operate for 20 minutes.
3. In the left navigation menu, select Color Settings > MCGD File Setup.
4. Select Create MCGD File.
5. Enter a name for the MCGD file and select Create.
6. If the MCGD file will be associated with a 3D channel, select the 3D Sync slider.
7. In the red area of the chromaticity image, select the empty circle.
The test pattern is automatically displayed.
8. Measure the red chromaticity with the colorimeter.
9. Enter the red chromaticity value in the x field.
10. Select Next and enter the red chromaticity value in the y field.
11. For the green, blue, white (center circle), and black chromaticity measurements, repeat steps
7 to 10.
12. Select Save.
Editing an existing MCGD file
Edit an existing Measured Color Gamut Data (MCGD) file when on-screen color readings change.
1. In the left navigation menu, select Color Settings > MCGD File Setup.
2. In the MCGD File list, select a MCGD file.
3. Edit the measured color values.
4. Select Save
CineLife+ User Guide
020-103073-11 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
.
71
Advertisement
