Advertisement
LED action
Flashing red
Solid red
Logging into the projector
Log into the projector to access projector menus.
1. Select Login.
2. In the User list, select a username.
3. Enter your password.
4. Select Login.
Logging out of the projector
Log out of the projector to restrict access to projector menus or to change access permissions.
•
Select Logout.
Determining the projector IP address
Before accessing the projector user interface remotely, determine the IP address of the projector. Use
the following method to determine the projector IP address when no touch panel is installed.
1. Connect the projector to the theater network using an Ethernet cable.
2. Make sure the projector is not in Standby mode by selecting the recessed button between the
USB-C port and the USB port on the Video Input panel.
Pressing the recessed button transitions the projector from Standby to powered on.
CineLife+ User Guide
020-103073-11 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Projector state
New critical alarm or warning
Existing critical alarm or warning
Operating the projector
Description
New critical alarm or warning has
not been acknowledged by the
operator.
Critical alarm or warning exists, but
has been acknowledged by the
operator.
16
Advertisement
