Sensor - R&S RT-ZC30 User Manual

®
R&S RT-ZC30
Power plug
Connect the plug to the R&S RT-ZA13 probe power supply receptacle to supply
power to the sensor.
2.4.3

Sensor

2
1
3
1
Figure 2-3: Sensor overview
1 = Current direction indication
2 = Jaw unlocked
3 = Opening lever
4 = Sensor cord
Current direction indication
Clamp the device to the conductor so that the direction in which the current being
measured is flowing matches the arrow.
Opening lever
Operating lever for opening the sensor head. Always use this lever to open the
sensor head.
JAW UNLOCKED indication
If the sensor head is unlocked, you can see this indication on the probe.
Sensor head
The sensor head clamps on the conductor being measured, and carries out the
actual current measurement.
User Manual 1409.7872.02 ─ 04
RT-ZC30
Product description
Description of the probe
4
12