Connecting Sensor - R&S NRT2 User Manual

®
R&S NRT2

4.2 Connecting Sensor

The sensors have to be connected between source and load. They measure the power
flux in both directions, i.e. from the source to the load (forward power) and conversely
(reverse power). The ratio of forward and reverse power is a measure for the matching
of the load which can be expressed as standing wave ratio (SWR), return loss or
reflection coefficient.
Figure 4-1: R&S NRT2 base unit
1 = Connection sensor - R&S NRT2
2 = Connector to source
3 = Connector to load
User Manual 1178.5550.02 ─ 03
Preparing for Use
Connecting Sensor
23