Table of Contents
Advertisement
®
R&S
NRX
5 Instrument Tour
●
Front Panel
●
Rear Panel
5.1 Front Panel Tour
Figure 5-1: Front View of R&S NRX
1 = Module bay for optional connectors, see
2 = Sensor connectors A and B, see
3 = Touchscreen, see
4 = Keys, see
5 = Cursor block for scrolling in the menus, marking of parameters to be set and for numeric entries, see
Chapter 5.1.5, "Cursor
6 = USB host interface, see
7 = On/standby key, see
5.1.1 Sensor Connector A and B
See (2) in
Sensor connectors A and B are used to connect the R&S NRP power sensors and the
R&S NRQ6. For details on the supported power sensors, see the data sheet.
The complete functional range, including external trigger and reference clock for the
synchronization of connected sensors, is provided by these connectors.
Further information:
●
Chapter 4.8.1, "R&S NRPxxS/A/T and R&S
●
Chapter 4.8.2, "R&S
Getting Started 1424.7070.02 ─ 04
Tour......................................................................................................15
Tour...................................................................................................... 19
Chapter 5.1.1, "Sensor Connector A and
Chapter 5.1.3,
"Touchscreen",
Chapter 5.1.4,
"Keys",
on page 16.
Block",
on page 18.
Chapter 5.1.6, "USB Host
Chapter 5.1.7, "On/Standby
Figure
5-1.
NRP‑Zxx",
Chapter 5.1.2, "Module
Bay",
on page 16.
Interface",
on page 18.
Key",
on page 18.
NRQ6",
on page 13
on page 14
Instrument Tour
Front Panel Tour
on page 16.
B",
on page 15.
15
Advertisement
Table of Contents
