Using A Power Sensor; Measuring The Power With A Power Sensor - R&S ZNH User Manual

®
R&S ZNH

4.6 Using a Power Sensor

R&S ZNH option
R&S ZNH-K9 (order number: 1334.6800.02) option is required to operate the
R&S ZNH in the power sensor mode.
For highly accurate power measurements, you can connect one of the power sensors
that are supported by the R&S ZNH.
For a list of R&S ZNH supported power sensors, see the datasheet of the R&S ZNH.
You can connect the list of supported power sensors to the USB port of the R&S ZNH.
This connector allows you to control the power sensor and supplies it with power. For
more information, see

4.6.1 Measuring the Power with a Power Sensor

For more information about the characteristics of the supported power sensors, refers
to their datasheet.
User Manual 1334.5985.02 ─ 02
"USB type A connector"
Basic Operation
Using a Power Sensor
on page 26.
65