®
R&S
NRX
3 Instrument Tour
●
Front Panel
●
Rear Panel
3.1 Front Panel Tour
Figure 3-1: Front panel of the R&S NRX
1 = Module bay for optional connectors, see
2 = Sensor connectors A and B, see
3 = Touchscreen, see
4 = Keys, see
5 = Cursor keys, see
6 = USB host interface, see
7 = On/standby key, see
3.1.1 Sensor Connector A and B
See (2) in
Sensor connectors A and B are used to connect the R&S NRP power sensors and the
R&S NRQ6. For details on the supported power sensors, see the data sheet.
The complete functional range, including external trigger and reference clock for the
synchronization of connected sensors, is provided by these connectors.
Further information:
●
Chapter 4.8, "Connecting Power
3.1.2 Module Bay
See (1) in
User Manual 1178.5566.02 ─ 05
Tour......................................................................................................14
Tour...................................................................................................... 19
Chapter 3.1.1, "Sensor Connector A and
Chapter 3.1.3,
"Touchscreen",
Chapter 3.1.4,
"Keys",
on page 16.
"Cursor keys"
on page 18.
Chapter 3.1.5, "USB Host
Chapter 3.1.6, "On/Standby
Figure
3-1.
Figure
3-1.
Chapter 3.1.2, "Module
Bay",
on page 16.
Interface",
on page 18.
Key",
on page 18.
Sensors",
on page 26
Instrument Tour
Front Panel Tour
on page 14.
B",
on page 14.
14