State; Continuous Value Update; Select; Zeroing Power Sensor - R&S FSW Series User Manual

®
R&S FSW

State

Switches the power measurement for all power sensors on or off. Note that in addition
to this general setting, each power sensor can be activated or deactivated individually
by the
settings.
Remote command:
[SENSe:]PMETer<p>[:STATe]

Continuous Value Update

If activated, the power sensor data is updated continuously during a sweep with a long
sweep time, and even after a single sweep has completed.
This function cannot be activated for individual sensors.
If the power sensor is being used as a trigger (see
external trigger"
ignored.
Remote command:
[SENSe:]PMETer<p>:UPDate[:STATe]

Select

Selects the individual power sensor for usage if power measurement is generally acti-
vated
The detected serial numbers of the power sensors connected to the instrument are
provided in a selection list. For each of the four available power sensor indexes
("Power Sensor 1"..."Power Sensor 4"), which correspond to the tabs in the configura-
tion dialog, one of the detected serial numbers can be assigned. The physical sensor is
thus assigned to the configuration setting for the selected power sensor index.
By default, serial numbers not yet assigned are automatically assigned to the next free
power sensor index for which "Auto Assignment" is selected.
Alternatively, you can assign the sensors manually by deactivating the "Auto" option
and selecting a serial number from the list.
Remote command:
[SENSe:]PMETer<p>[:STATe]
SYSTem:COMMunicate:RDEVice:PMETer<p>:DEFine
SYSTem:COMMunicate:RDEVice:PMETer<p>:CONFigure:AUTO[:STATe]
on page 1108
SYSTem:COMMunicate:RDEVice:PMETer<p>:COUNt?

Zeroing Power Sensor

Starts zeroing of the power sensor.
For details on the zeroing process refer to
on page 381.
Remote command:
CALibration:PMETer<p>:ZERO:AUTO ONCE
User Manual 1173.9411.02 ─ 43
Select setting on each tab. However, the general setting overrides the individual
on page 378), continuous update is not possible; this setting is
(State function).
Common Measurement Settings
on page 1114
"Using the power sensor as an
on page 1114
on page 1114
"How to Zero the Power Sensor"
on page 1109
Data Input and Output
on page 1108
on page 1108
376