Chapter 2: Using the GPS Feature
C
2: u
haPter
sIng the
The VMC has a built-in GPS receiver module by default. Global Positioning
System (GPS) uses a constellation of 24 (up to 32) medium earth orbit
satellites to transmit and receive microwave signals to determine its current
location.
You need to install the third-party GPS navigation software to take advantage
of the GPS feature.
Setup and Using GPS Information
Users can use the GPSinfo.exe program to verify that the GPS is correctly
configured and working properly. Also, users can use the GPSinfo.exe pro-
gram to enable WAAS/EGNOS and power saving mode.
1. Go to Device Manager to ensure the device is installed correctly.
Copyright © 2014 NEXCOM International Co., Ltd. All rights reserved
gPs f
eature
2. Insert the Installation Disc into CD-Rom drive and execute the "Gpsinfo.
3. Follow the given instructions to complete the installation.
16
exe" file (the file also saved in C:\Utility\GPS_Utility).
VMC 100/1100 Series User Manual