Gps Information Instructions - Nexcom VMC 100 Series User Manual

Chapter 2: Using the GPS Feature

GPS Information Instructions

1.
Make sure that the GPS device is properly inserted.
2.
Start GPS Information Software.
3.
Choose and select the proper communication port. (It might be neces-
sary to try each available port to find the right one since the default
communication port varies according to different hardware device.)
4.
Click "Start GPS button" to activate the GPS receiver.
5. Upon successful connection, GPS output data should be displayed in
"Main GPS data Window". If no data is observed, make sure the GPS
receiver is working and properly inserted. Otherwise choose another
communication port.
6.
Satellite status can be observed in the "GPS Info Window". Use the
"Tab Menu" to switch between Setup window and GPS info window.
7. Please make sure to de-activate the GPS device before exiting this pro-
gram.
Copyright © 2014 NEXCOM International Co., Ltd. All rights reserved
19
VMC 100/1100 Series User Manual