Appendix B: Gps Feature; Ublox-Neo M8 Overview; Technical Specifications - Nexcom VTC 7200-BK User Manual

Vehicle telematics computer
Table of Contents

Advertisement

Appendix B: GPS Feature

Appendix B: GPS Feature

uBlox-NEO M8 Overview

The NEO-M8 series of standalone concurrent GNSS modules is built on the
exceptional performance of the u-blox M8 GNSS (GPS, GLONASS, Galileo,
BeiDou, QZSS and SBAS) engine in the industry proven NEO form factor.
The NEO-M8 series provides high sensitivity and minimal acquisition times
while maintaining low system power. The NEO-M8M is optimized for
cost sensitive applications, while NEO-M8N and NEO-M8Q provide best
performance and easier RF integration. The NEO form factor allows easy
migration from previous NEO generations. Sophisticated RF-architecture
and interference suppression ensure maximum performance even in GNSS-
hostile environments.
The NEO-M8 combines a high level of robustness and integration capability
with flexible connectivity options. The future-proof NEO-M8N includes
an internal Flash that allows simple firmware upgrades for supporting
additional GNSS systems. This makes NEO-M8 perfectly suited to industrial
and automotive applications.
The DDC (I2C compliant) interface provides connectivity and enables
synergies with most u-blox cellular modules. For RF optimization the
NEO-M8N/Q features an additional front-end LNA for easier antenna
integration and a front-end SAW filter for increased jamming immunity.
u-blox M8 modules use GNSS chips qualified according to AEC-Q100, are
manufactured in ISO/TS 16949 certified sites, and fully tested on a system
level. Qualification tests are performed as stipulated in the ISO16750
standard: "Road vehicles – Environmental conditions and testing for
electrical and electronic equipment".
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.

Technical Specifications

Features
Receiver type
72-channel u-blox M8 engine
GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1
SBAS L1 C/A: WAAS, EGNOS, MSAS
Galileo-ready E1B/C (NEO-M8N)
Nav. update rate
Single GNSS: up to 18 Hz
1
Concurrent GNSS: up to 10 Hz
Position accuracy
2.0 m CEP
Acquisition
Cold starts:
Aided starts:
Reacquisition:
Sensitivity
Tracking & Nav:
Cold starts:
Hot starts:
Assistance
AssistNow GNSS Online
AssistNow GNSS Offline (up to 35 days)
AssistNow Autonomous (up to 6 days)
OMA SUPL & 3GPP compliant
Oscillator
TCXO (NEO-M8N/Q),
Crystal (NEO-M8M)
RTC crystal
Built-in
Noise figure
On-chip LNA (NEO-M8M). Extra LNA for
lowest noise figure (NEO-M8N/Q)
57
NEO-M8N/Q
NEO-M8M
26 s
27 s
2 s
4 s
1 s
1 s
–167 dBm
–164 dBm
–148 dBm
–147 dBm
–156 dBm
–156 dBm
VTC 7200-BK Series User Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vtc 7230-bkVtc 7240-bkVtc 7210-bkVtc 7220-bk

Table of Contents