Wheel Kit (Option); Long Period Of Inactivity; Operating The Machine; Jobsite - Norton Clipper CMV 1000 Verto Operating Instructions Manual

VERS. 21.01.2019
4.3

Wheel kit (option)


The machine can be moved on a flat surface using its original wheel kit

Insert the two back wheels on the back side of the machine into the outer European pallet feeds
and the front joke wheel at the front side of the machine in the middle pallet feed

Turn the handwheel on the front joke wheel until the third wheel touches the floor and raise the
machine. The machine then leans on its three wheels. After the machine has been moved, on the
floor, always lift the front joke wheel using the handle
4.4

Long period of inactivity

If the machine is not going to be used for a long period, please take the following measures:

Completely clean the machine

Empty the water system

Take the water pump out of the slurry and clean it thoroughly.
The storage site must be clean, dry and at a constant temperature.
5

OPERATING THE MACHINE

You will find in this chapter some advice about where and how to put up the machine.
5.1

Jobsite

Voici quelques renseignements concernant le site d'installation de la machine.
CMV 1000 Verto_MAN_EN
23