Functioncontrol - tams elektronik mc2 EasyControl Digital System Silver Edition Manual

6.3.2. FunctionControl.vi
With the FunctionControl.vi you can control the vehicle decoder that you have previously
called up with the help of the HandControl.vi. While you can only switch the functions F0 to F9
on and off with the HandControl.vi, the FunctionControl.vi allows you to switch the functions
F0 to F32. If you have assigned icons to the functions, these are displayed instead of the
function numbers.
You can switch between displaying the speed controller on the left or right side of the user
interface by clicking on the field
From FunctionControl.vi you can switch directly to SwitchControl.vi to switch accessory
decoders or go back to HandControl.vi.
Decoder
address
Vehicle
name
Digital
format
Current
speed level
Function keys
(F)1, 2, 3...9, 0
Switched on
functions
0, 5, 10, 19, 20
.
Full screen mode on/off
Change to
SwitchControl.vi
Change to
HandControl.vi
Direction
change-over
switch
Speed
controller
Speed controller
to the left side
Operation with the mc² | 6.11