Devices For The Xpressnet - tams elektronik mc2 EasyControl Digital System Silver Edition Manual

4.2.4. Devices for the XpressNet

Info
The Xnet interface enables the connection of input devices that establish the connection to the
digital control centre via the XpressNet developed by Lenz Elektronik.
Connection: RJ12
Possible applications of the XpressNet input devices

You can use the input devices that you integrate into the digital system via the XpressNet
interface

to control vehicle decoders for Motorola, DCC and mfx (the latter in m3 format),

to switch accessory decoders for Motorola and DCC,

to program decoders using main track programming (POM).
However, it is not possible to use XpressNet input devices to program decoders on the
programming track or to configure the digital system.
Power supply to the devices on the XpressNet interface
Input devices for the XpressNet are supplied via the bus line.
! Notice:
The total current of all external digital devices that are connected to the various interfaces of
the mc² and do not have their own power supply must not exceed 1.2 A. Otherwise, the mc²
automatically switches off the power supply for the external devices.
For the connection of

Lenz hand controllers (e.g. LH100 and
LH101)*

Locomouse from Roco (from version 2)

Multimouse from Roco
* For the connection of Lenz hand controllers, an additional
adapter may be required.
Connections | 4.7