Your Mc² - tams elektronik mc2 EasyControl Digital System Silver Edition Manual

3. Your mc²
The main tasks of your mc² include,

to send the digital driving and switching commands to the vehicle and accessory decoders

to receive and forward the feedback signals from decoders and feedback units

to serve as a "medium" for programming the decoders.
Furthermore

a booster is integrated in your mc², which brings the digital signals to the track and
supplies the vehicles with power.

your mc² acts as an interface to various additional devices such as external input devices,
feedback devices, PC and mobile devices.
Browser-based
Your mc² uses the possibilities offered by PCs, mobile devices such as smartphones or tablets
and fast Internet in private households.
The web interface "mc²-Toolbox", i.e. the software with which you configure your digital
control and control your system, is called up via the browser of a PC, tablet or smartphone.
You then have access to all functions of the mc². The mc²-Toolbox is installed on your mc²
and you can perform updates for it in the same way as for the firmware of the central unit.
You do not need to install any software or app on your PC or mobile devices. The question of
whether the operating systems of the various devices are compatible with each other is
therefore irrelevant.
You can connect the mc² to your home network and the Internet via a router. Connection to a
Wlan router is a prerequisite for the use of mobile end devices. Alternatively, you can connect
a PC directly to your mc² (without a diversion via a router). An Internet connection is only
absolutely necessary if updates are to be requested.
The mc² Toolbox
With the Toolbox (the web interface of the mc²) you manage your digital control including all
connected input devices, feedback devices and boosters. You can

configure your mc², i.e. adapt it to your ideas and the conditions of your layout

programme your vehicle and accessory decoders

manage your feedback devices and query messages from the various data buses (BiDiB,
s88, Märklin-CAN, LocoNet)

display RailCom messages

carry out updates
Your mc² | 3.1