Table of Contents
Advertisement
2. Commissioning
After commissioning, you must first configure your mc², i.e. adapt it to your ideas and adjust it
to the conditions of your model railway layout. It is therefore not recommended to start up the
mc² with a smartphone, as the display of the mc²-Toolbox (the web interface of your control
unit) is unclear due to the small screen size.
Direct connection to the PC
You can connect your mc² directly to your PC.
Connecting to the Intranet / Internet
By connecting your mc² to your router, you can use devices such as a PC, tablet or
smartphone that also have a connection to the router to configure your mc² and control your
system. You can also use the router to connect to the Internet, which you need to check for
updates.
Plug the (grey) patch cable on one side
into the LAN interface of the mc² and on
the other side into the RJ45 socket of the
network interface of your computer.
Plug the (grey) patch cable into the LAN
interface of the mc² on one side and into
a free RJ45 socket of the router on the
other side.
Commissioning | 2.1
Advertisement
Table of Contents
