Table of Contents
Advertisement
6.3.3. DriveControl.vi
Select up to four vehicle decoders that you want to control. To do this, enter the addresses
directly in the input fields or click the arrow keys to increase or decrease the set address by
1 each.
You can change the speed level for the selected vehicle decoders using the sliders, change the
direction of travel and switch the F0 function on and off.
You can go from DriveControl.vi directly back to HandControl.vi.
Change to
Decoder
Full screen mode on/off
HandControl.vi
adresses
Speed
Direction change-
Function
controller
over switch
key F0
6.12 | Operation with the mc²
Advertisement
Table of Contents
