Messages; Bidib - tams elektronik mc2 EasyControl Digital System Silver Edition Manual

6.2.3. Messages

 Read out and display system messages
The messages help to check the function of the connected components and to find the causes
of malfunctions.
RailCom messages
You can display all messages or limit the type of messages to be displayed by:

Decoder address

Decoder type

Type of message
Messages from the BiDi bus
The display of BiDiB messages is currently not yet implemented (as of Juni 2022).
System messages
These help to find causes of malfunctions of your digital system. Tip: Before contacting the
Technical Hotline about problems with your digital control, connect your mc² to a PC or tablet.
The hotline staff may ask you to read out certain types of messages.

6.2.4. BiDiB

 Display of all connected BiDiB nodes, their assignment to the levels and their properties
 Identify and Reset
The list shows all connected BiDiB nodes and their assignment to the levels. According to the
BiDiB specification, the mc² is a node and fulfils the tasks of a BiDiB interface and a track
output device. The integrated booster also reports its data via the BiDi bus. The mc² is
therefore displayed as a BiDiB node in the top level - regardless of whether other BiDiB
components are present.
The properties of the BiDiB nodes are listed in the info field:

the address

the manufacturer

the type designation

the name and

the features
After right-clicking on the name of a node, a window opens and you can send an Identify
command or reset the node.
Operation with the mc² | 6.7