Table of Contents
Advertisement
Specifications
GENERAL
Supply voltage
Operating temperature
Storage temperature
Humidity
MECHANICAL
Size
Weight
OPERATION
Communication
interface to BlueBox
Debug signal valid
input voltage range
Power consumption
PROTECTION
Debug signals
DAP1-3 and DAPE1-3
DAP_RESET
VREF
9.0V DC via FNet cable
10°C to 40°C
-10°C to 60°C
5% to 80% RH
80 x 55 x 18 mm
0.125 kg
iSYSTEM proprietary FNet
3.3V (max. 3.6V)
Max. 1.5W (dependent on operation mode)
33 Ohm series termination/protection resistors, ESD protection devices
10k Ohm pull-down
1k Ohm pull-up, 33 series termination/protection resistor
1k Ohm input impedance
Advertisement
Table of Contents
Need help?
Do you have a question about the iSYSTEM Infineon DAP and is the answer not in the manual?
Questions and answers