Color; Dimmer; Performance Settings; Save Dmx/Blackout - SHOWTEC Performer Profile 600 Q4 Manual

Performer Profile 600 Q4

7.4. Color

With this menu you can adjust the color calibration functions.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the following 3 options:
Adjusted output
Off
RGB to White
04) When the display shows
this way, different Performer versions are color-balanced in order to match each other.
05) When the display shows
and the output is the most powerful.
06) When the display shows
displayed is the specific color which you have calibrated in CAL 2  RGB.W menu.

7.5. Dimmer

With this menu you can adjust the dimmer.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 4 dimmer speed options (DIM1-DIM4, from fast to
slow) and OFF.
04) If you choose OFF, then RGBW and the master dimmer are linear.
05) The dimmer settings do not have any influence on the device's performance in DMX TOUR mode.
The DMX settings override the dimmer settings.

7.6. Performance settings

With this menu you can influence the device's performance.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 3 modes:
Default mode. The Performer provides a compromise between output
quality and noise level.
Noise level-oriented mode. The Performer emits little noise and operates at
moderate power level.
Output-oriented mode. The device does not offer any consideration for
noise level and operates at full power.

7.7. Save DMX/Blackout

With this menu you can set the device's behaviour in case of a DMX signal error.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 2 options:
Blackout
DMX data save
04) If the display shows
05) If the display shows
ensure undisrupted performance.
Ordercode: 33061
, the RGB output is adjusted to a standard preset universal color. In
, the RGB settings are: 255, 255, 255. The RGB values are not adjusted
, RGB to White is active. This means RGB = 255, 255, 255. The color
, the Performer will blackout the output, in case of the DMX signal error.
, the Performer will fall back on the last working DMX signal, which will
26
.
.
.
.