Table of Contents
Advertisement
Performer Profile 600 Q4
7.8. Strobe personalities
With this menu you can set the strobe's personalities.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 2 modes.
04) If the display shows
personalities Tour and TR16.
05) If the display shows
AR2.S.
7.9. DMX data transfer
With this menu you can set the DMX data transfer.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 2 options.
04) If the display shows
05) If the display shows
8. Calibration menu
With this menu you can adjust the temperature of the white color presets.
01) While in main menu, press the
02) Press the ENTER button to set the password.
03) Insert the password: UP>DOWN>UP>DOWN and press the ENTER button to confirm.
04) Press the UP/DOWN buttons to toggle between the menus described below.
8.1. Calibration menu 1
With this menu you can adjust the temperature of the built-in white color presets.
01) Press the
UP/DOWN buttons
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 11 white color presets:
04) Once you have chosen the desired preset, press the ENTER button to open the submenu.
05) Press the UP/DOWN buttons to toggle between RED, GREEN, BLUE and WHITE.
06) Press the ENTER button to open the desired color's brightness settings.
07) Press the UP/DOWN buttons to increase/decrease the color brightness. The adjustment range of
each color is between 0-255, from dark to brightest.
8.2. Calibration menu 2
With this menu you can adjust the temperature of the white color.
01) Press the
UP/DOWN buttons
02) Press the ENTER button to open the menu.
03) Now you can adjust the intensity of the RGB colors. Press the UP/DOWN buttons to toggle between
RED, GREEN and BLUE.
04) Press the ENTER button to open the desired color's brightness settings.
05) Press the UP/DOWN buttons to increase/decrease the color brightness. The adjustment range of
each color is between 0-255, from dark to brightest.
8.3. Reset calibration
With this menu you can reset the calibration.
01) Press the
UP/DOWN buttons
02) Press the ENTER button to set the password.
03) Insert the password: UP>DOWN>UP>DOWN and press the ENTER button to confirm.
04) The display will show OK and the calibration will have been reset.
Ordercode: 33061
, you can choose between 3 different strobe modes in the DMX
, you'll have one linear strobe in the DMX personalities Tour, TR16 and
, the Performer will not send DMX data to the other connected devices.
, the Performer will send DMX data to the other connected devices.
UP/DOWN buttons
until the display shows
until the display shows
until the display shows
27
.
.
until the display shows
.
.
.
.
.
Advertisement
Table of Contents
