Main Menu Options; Static Colors - SHOWTEC Performer Profile 600 Q4 Manual

Performer Profile 600 Q4

Main Menu Options

Static Colors

Built-in and custom programs
Master/ slave mode
DMX address
DMX configuration
Edit mode
Settings
Calibration menu
1. Static Colors
With this menu you can set the static colors.
01) While in main menu, press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the static colors (Red, Green, Blue and White) and
strobe.
04) Once you have chosen the desired color with the UP/DOWN buttons, press the ENTER button to
adjust the color intensity. The adjustment range is between 0-255, from dark to brightest. You can set
this with the UP/DOWN buttons.
05) When the display shows
the strobe frequency. The adjustment range is between 0-20, from OFF to high strobe frequency.
06) You can combine RED, GREEN, BLUE and WHITE to create an infinite range of colors (0-255).
Ordercode: 33061
, press the UP/DOWN buttons to increase/decrease
22
.