Rear Panel Switches And Connectors; Main Menu Items - ADIC VLS AIT Installation And Operating Manual

Rear Panel Switches and Connectors

Switches and connectors on the rear of the VLS are shown in Figure 7.
Power
Switch
AC Power
Connector
SCSI I/O
Connectors

Main Menu Items

Use the following diagram as a quick reference once you have become familiar with the LCD
menus described on the next few pages. The names at the top of the diagram are selections
available from the Main Menu. When you choose one of the Main Menu items, a set of
options appears; these options are listed below the Main Menu selections. If an option has
sub-options, these sub-options are listed to the right of the option.
18
Equipment Description
S C S I I/O
C o nn ectors
F an F ilter
R ea r
A ccess P anel
A C P o w er C o nn ector
an d P o w er S w itch
Figure 7. Back of VLS
Turns on the AC power to the VLS.
Plug the AC power cord into this connector.
Connections for the cable which connects the VLS to the host computer, to
other VLS units and/or to other devices on the SCSI channel.