Base Menu; Model List; Model List Detail; New Model - GRAUPNER mz-32 HoTT Reference Manual

BASE Menu

tap on the model type icon in the upper center of the screen to activate the desired filter.
You can sort the model list by name, creation date or bind group by tapping on the table
header.
B01S1
each bound receiver has.
The bottom fields show the model configurations such as model type, wing type and tail
type. To load and activate the model, tap the Select field.
B01S2
Tap on Throttle Minimum to change the throttle direction.
A selection of None (only available for Airplanes) is for models without a motor, such as a
sailplane. A selection of Rear causes the throttle channel to increase as the throttle control
Graupner mz-32 Help Reference Manual

MODEL LIST

In the Model List menu, you can create a new model or
select and load an existing one.
To create a new model, tap on the number next to the
model name. A selection toolbar will show with the
available options.
Tap the + icon to create a new model.
Tap on the copy icon to copy an existing model.
After tapping the + icon, a keypad will show where you
can enter your model name. Tapping the return key
brings you to the New Model selection menu.
To change the view selection of available model types,

MODEL LIST DETAIL

By tapping on the model Name, additional details about
the selected model are displayed prior to loading and
activating the model.
The Date and Time fields show when the model was
created, and the Model Time shows how long the model
has been actively used.
The Bind Group field shows to which group this model
belongs (check the RF Set menu for additional
information).
The Bind Info fields show how many receivers the
selected model is bound to and how many channels

NEW MODEL

The New Model menu can only be accessed from the
Model List menu when creating a new model.
Tap on the Model Type icon to select your model type.
Each model type will have different selection options.
The following example is for airplanes.
Tap on the Wing Type icon to select your airplane's
wing type. If your wing type is delta tap on the delta
icon symbol to change the wing type selection.
Tap on the Tail Type icon to choose your tail type.
Tap on the engine type to select how many engines
your airplane has.
Page 5 of 42 Help-Ref-EN-V1.0