Table of Contents
Advertisement
ESD Information
Handling of Electronic Components and ESD
The possibility of unseen damage caused by ESD is present whenever components are
transported, stored, or used. The risk of ESD damage can be greatly reduced by paying close
attention to how all components are handled.
— Perform work on all components at a static-safe workstation.
— Keep static-generating materials at least one meter away from all components.
— Store or transport components in static-shielding containers.
Always handle printed circuit board assemblies by the edges. This will
reduce the possibility of ESD damage to components and prevent
contamination of exposed plating.
For Additional Information about ESD
For more information about preventing ESD damage, contact the Electrical Over
Stress/Electrostatic Discharge (EOS/ESD) Association, Inc. The ESD standards developed by this
agency are sanctioned by the American National Standards Institute (ANSI).
6
U9361C/F/G/M Receiver Calibrator Quick Start Guide
Advertisement
Table of Contents
