Table of Contents
Advertisement
Care and Maintenance
Hold the torque wrench lightly at the groove located at the end of the
handle.
Apply force perpendicular to the wrench handle. This applies torque to the
connection through the wrench. Do not hold the wrench so tightly that you
push the handle straight down along its length rather than pivoting it,
otherwise you apply an unlimited amount of torque.
Figure 8
Tighten the connection just to the torque wrench "break" point as shown in
. Do not
tighten the connection further.
U9361C/F/G/M Receiver Calibrator Quick Start Guide
29
Advertisement
Table of Contents
