Output Settings; Judgment Output Selection - Panasonic HL-G1 A-C5 Series User Manual

Chapter 3 Function

3-3-5 Output Settings

 Judgment Output Selection
This function makes it possible to select the operation of the output block.
An alarm will not be output if "3-state" is selected.
The final decision process is done in digital measurements. When an alarm is
turned ON, the value will be set to +999.9999 with which judgment processing will
be performed, provided that a fixed value has been set with "digital output at
alarm".
Judgment Output
Selection
3
Logic
Independent
2-state
3-state
*
Output operation
OUT1 OUT2 OUT3
Judgment Judgment
Alarm
1 2
Judgment Judgment
Alarm
1 2
Judgment Judgment
Alarm
1 2
Judgment Judgment Judgment
1 2 3
indicates the default value.
Display
Threshold a
Threshold b
ON
Output status
OUT1
(OPEN)
OFF
ON
OUT2
(OPEN)
OFF
ON
(OPEN)
OUT1
OFF
ON
OUT2
(OPEN) Output status
OFF
ON
OUT1 (OPEN) Output status
OFF
ON
OUT2
(OPEN)
OFF
ON
(OPEN)
OUT1
（HI） OFF
ON
(OPEN)
OUT2
OFF
（GO）
ON
OUT3
(OPEN)
Output status
（LO）
OFF
3-22
Displacement (+)
Output status
Output status
Output status
Output status
Output status
Output status
Output status