5.8 Output Operation Setting
5.8 Output Operation Setting
■
Overview
This setting is used to set the operation mode of control output.
When the operation mode is set to light-ON or dark-ON, control output operation will be as
follows for each detection state.
Detection state
Light entry state
Light interrupted state
■
Setting method
● Hold down the DOWN key for 3 seconds or longer on the setting screen, and the setting
change is suspended and the screen returns to the measurement display.
● The output operation indicator lights up when the control output is ON and goes out when the
control output is OFF.
Setting item
Output operation setting
5-16
Ramco Innovations www.ramcoi.com Got Questions? Phone 800-280-6933 Email nsales@ramcoi.com
Output operation setting
Light-ON
Control output ON
Control output OFF
Set value
Light-ON (L-on)
Dark-ON (d-on)
Dark-ON
Control output OFF
Control output ON
Default value
L-on
WUME-HGF1UM-2