Sending Delay Time - Panasonic HL-G1 A-C5 Series User Manual

Chapter 3 Function
 Sending Delay Time
This is a useful function if the connection mode is set to RS-485 multi.
Select the sensor's delay time in response to each command transmitted from
the host device.
Setting
0.1
0.2
0.5
3
*
● Setting Procedure
1
2
3
Press the [DOWN] key four times. The
"Sending Delay Time" screen will be
displayed.
4
Press the [ENTER] key. The delay time
setting will be displayed.
5
connection mode. (Example: Changing the
delay time to 20 ms.)
6
Press the [ENTER] key to determine the
sending delay time setting.
Function
0 No delay time
Delay time 0.1ms
〃 0.2ms
〃 0.5ms
1 〃 1ms
2 〃 2ms
5 〃 5ms
indicates the default value.
Display the "COM Setting" screen while
in setting mode.
Press the [ENTER] key. The "Terminating
Resistor Selection" screen will be displayed.
Press the [UP]/[DOWN] key to change the
Panel
Setting
display
10 Delay time 10ms
20
50
100
200
500
1000
3-38
Panel
Function
display
〃 20ms
〃 50ms
〃 100ms
〃 200ms
〃 500ms
〃 1000ms