Table of Contents
Advertisement
Introduction
Laser Product Handling
JIS/IEC/GB
Laser Diode Sensor
The laser is classified in accordance with JIS (JIS C 6802: 2005), IEC (IEC
60825-1: 2007) and GB (GB 7247.1: 2012) standards.
Model No.
Wavelength
Max. output
Class
Precautions
1) Be careful not to stare at the laser beam directly or the reflected light of the
mirror surface.
2) Install the sensor so the laser beam will be located higher or lower than eye level
in order not to watch the beam directly while the system is in operation.
3) Contact the nearest office of Panasonic Industrial Devices SUNX Co., Ltd. if the
system breaks down. The product is not provided with a function to stop laser
beam radiation automatically when the sensor head is disassembled. Do not
disassemble the sensor head, or otherwise you may be exposed to the laser beam.
4) Do not use the system in methods other than that specified in this manual.
5) Read the descriptions of the warning label carefully before use.
The warning label (English) is affixed to the side of the sensor head. Warning
labels in Japanese, Korean, and Chinese are enclosed. Use them as needed.
HL-G1 □□ -A-C5
HL-G1 □□ A-RA-C5
HL-G1 □□ -S-J
655 nm
1 mW
2
You may be exposed to hazardous laser radiation if the system is
controlled or adjusted in procedures not specified in this manual.
10
HL-G1 □□ A-RS-J
655 nm
0.39 mW
1
Advertisement
Table of Contents
