Panasonic HL-G1 A-C5 Series User Manual page 29

● Sensor head angle to the center of measurement target
for a diffuse reflection-type sensor
Mount the sensor head so that the emitter and
receiver will be located in parallel to each other
as shown in the illustration on the right-hand side.
Refer to "6-1 Sensor Head Specifications"
for the measurement center
measurement range.
Model name
HL-G103-A-C5
HL-G103-S-J
HL-G105-A-C5
HL-G105-S-J
HL-G108-A-C5
HL-G108-S-J
HL-G112-A-C5
HL-G112-S-J
HL-G125-A-C5
HL-G125-S-J
● Sensor head angle to the center of measurement target
for a specular reflection-type sensor
Attach so that the receiver will receive
light reflected directly as shown in the
figure to the right.
Model name
HL-G103A-RA-C5
HL-G103A-RS-J
HL-G105A-RA-C5
HL-G105A-RS-J
HL-G108A-RA-C5
HL-G108A-RS-J
distance and
Measurement center
distance
30 mm
50 mm
85 mm
120 mm
250 mm
Measurement Measuremen
center distance t range
26.3 mm ±2 mm
47.3 mm ±5 mm
82.9 mm ±10 mm
1-11
Chapter 1 Before Use
90°
Measurement range
±4 mm
±10 mm
±20 mm
±60 mm
±150 mm
Installation
angle
Installation
angle
15°
10.39°
7.53°
1