Panasonic HL-G1 A-C5 Series Instruction Manual

Compact Laser Displacement Sensor
Standard type
0815170
Thank you very much for purchasing Panasonic products. Read this Instruction Man-
ual carefully and thoroughly for the correct and optimum use of this product. Kindly
keep this manual in a convenient place for quick reference.
Download the HL-G1 Series User's Manual (PDF) from our Website. (http://panason-
ic.net/id/pidsx/global). Be sure to refer to the User's Manual for information in detail
before making settings in the control panel of the sensor head.
This product is intended to detect the objects and does not have the control func-
tion to ensure safety such as accident prevention.
Do not use the product as a sensing device to protect human body.
Please use the products that comply with local laws and standards for human
Install a fail-safe device when the product is used for the purpose that has a pos-
sibility of physical injury or serious extended damage.
BEFORE USE
1 OVERVIEW
This product is a compact laser displacement sensor incorporating a digital dis-
play and controller functions.
The standard type has three outputs plus analog outputs (current and voltage out-
The high-function type incorporates serial communications functions in addition to
vices.
2 CAUTIONS ON HANDLING LASER LIGHT
(EN 60825-1
-2014
-2014
GB : GB 7247.1
-2012
-2013
provide the safety measures for respective classes.
Laser hazardous class
Model
HL-G1
HL-G1
WARNING label
<English>
<Chinese>
INSTRUCTION MANUAL
High-function type
MJE-HLG1 No.0084-26V
WARNING
Sensor head model
sensor head.
Packing
included in the package.
• 1 sensor head unit
• 2 Instruction manual
• Laser warning labels (one set)
)
-2014
)
-2014 -2014
<Korean>
<Label position>
Install the product so the laser beam comes higher or lower than eye level in order
not to watch the beam directly during operation. Laser safety distance (Nominal
Please contact Panasonic Industrial Devices SUNX if the system breaks down. It
is not equipped with a function that stops laser radiation automatically during dis-
assembling the sensor head. The users therefore may be exposed to laser beam
in disassembling the sensor head.
3 I/O BLOCK AND NOMENCLATURE
2
1
3
4
5
8
6
7
9
10
11
1
2
3
4
-
4 SPECIFICATIONS
Standard type
Model
No.
High-function type
Measurement method
Measurement center distance
Measurement method
Beam source
Beam diameter (Note 2)
Beam receiving element
Resolution
Linearity
Temperature characteristics
Supply voltage
Sampling cycle
Voltage
output
Short-circuit protection
NP switching input
Timing input
Multiple input
(high-function type)
Laser radiation indicator
Digital display
Protective structure
Pollution degree
Insulation resistance
Dielectric Withstand
Vibration resistance
Vibration resistance
Name Function
Judgment output 1
Judgment output 2
Judgment output 3 or alarm output
TM Timing input
MI
inputs
NP NPN / PNP type switching input
+SD Transmission data
-SD Transmission data
+RD Reception data
-RD Reception data
SG Signal ground
+V
0V Power supply ground
* No SD/RD terminals are prepared for
dard types.
5 9
6 10 Emitter
7 Digital Display 11 Receiver
8
30mm 50mm 85mm
±4mm ±10mm ±20mm
0.1 × 0.1mm 0.5 × 1mm 0.75 × 1.25mm
±0.1%F.S.
Judgment output or alarm output (switchable)
NPN open-collector transistor / PNP open-collector transistor (switchable)
<Settings for NPN> <Settings for PNP>
• •
• • Residual voltage: 2.8V max.
(between output and 0V)
• Residual voltage: 2V max. •
•
power supply (depending on settings)
NPN operation: Depending on time to connect 0 V
PNP operation: Depending on time to connect positive terminal of external power supply
RS-422 or RS-485
Red LED for sign and 5-digit display
IP67 (except connector)
2
2
500m/s
-
Wiring color
Shield
single Black
conductor
Shield
single Gray
conductor
Black
White
Gray
Pink
Violet
Pink / Violet
Green
Twisted
-pair wire
Sky Blue
Twisted
-pair wire
Yellow
Shield
Brown
Blue
stan-
120mm 250mm
±60mm ±150mm
1.0 × 1.5mm 1.75 × 3.5mm
±0.3%F.S.