HP 64746 User Manual page 255

extra Combines the edma, pbclr, cs, pberr, grd, rom, pbio, and ipl
softkeys. Some values you can specify following the extra
softkey are:
Value
0xxxx xxxx xxxx xx0xb
0xxxx xxxx x0xx xxxxb
0xxxx xxxx xx0x xxxxb
0xxxx xxxx xxx0 xxxxb
0xxxx xxxx xxxx 0xxxb
0xxxx xxxx xxxx x0xxb
0xx0x xxxx xxxx xxxxb
0x0xx xxxx xxxx xxxxb
00xxx xxxx xxxx xxxxb
0xxxx xxxx xxxx xxx0b
0xxxx xxx0 xxxx xxxxb
0xxxx xxxx xxxx xxx1b
0110x xxxx xxxx xxxxb
0101x xxxx xxxx xxxxb
0100x xxxx xxxx xxxxb
0011x xxxx xxxx xxxxb
0010x xxxx xxxx xxxxb
0001x xxxx xxxx xxxxb
0000x xxxx xxxx xxxxb
00111 xxxx xxxx xxxxb
0xxxx 1xxx xxxx xxxxb
0xxxx 0xxx xxxx xxxxb
0xxx1 xxxx xxxx xxxxb
0xxx0 xxxx xxxx xxxxb
0xxxx xx1x xxxx xxxxb
0xxxx xx0x xxxx xxxxb
0xxxx x1xx xxxx xxxxb
0xxxx x0xx xxxx xxxxb
0xxxx xxxx 0xxx xxxxb
When a value is specified without one of these softkeys it is assumed to be an
address value.
Chapter 7: Using the Emulation Analyzer
Qualifying Trigger and Store Conditions
Description
BCLR active
BERR active
Chip select 0
Chip select 1
Chip select 2
Chip select 3
Dedicated mode interrupt 1
Dedicated mode interrupt 6
Dedicated mode interrupt 7
External DMA
Guarded memory access
Internal DMA
Normal mode interrupt level 1
Normal mode interrupt level 2
Normal mode interrupt level 3
Normal mode interrupt level 4
Normal mode interrupt level 5
Normal mode interrupt level 6
Normal mode interrupt level 7
PB10 high
PB10 low
PB11 high
PB11 low
PB8 high
PB8 low
PB9 high
PB9 low
Write to ROM
255