Forwarding Commands To Other Hp 64700 Interfaces; To Forward Commands To The High-Level Debugger - HP 64746 User Manual

Forwarding Commands to Other HP 64700
Interfaces
To allow the emulator/analyzer interface to run concurrently with other HP 64700
interfaces like the high-level debugger and software performance analyzer, a
background "daemon" process is necessary to coordinate actions in the interfaces.
This background process also allows commands to be forwarded from one interface
to another. Commands are forwarded using the forward command available in the
command line. The general syntax is:
forward <interface_name> "<command_string>" <RETURN>
This section shows you how to:
•
•

To forward commands to the high-level debugger

• Enter the forward debug "<command string>" command using the command
line.
Examples To send the "Program Run" command to the debugger:
forward debug "Program Run" <RETURN>
Or, since only the capitalized key is required:
forward debug "P R" <RETURN>

Forwarding Commands to Other HP 64700 Interfaces

Forward commands to the high-level debugger.
Forward commands to the software performance analyzer.
Chapter 3: Entering Commands
93