Table of Contents
Advertisement
Chapter 7: Using the Emulation Analyzer
Modifying the Trace Display
To display the trace, disassembling from a line
number
• Use the disassemble_from_line_number option to the display trace command.
The "disassemble_from_line_number" trace display option causes the inverse
assembler to attempt to begin disassembling the trace information from the
specified line number. This option is required for inverse assemblers that cannot
uniquely identify opcode fetch states on the processor bus.
If the line number specified is not an opcode fetch state, the disassembled
information will be incorrect.
Examples
To display the trace, disassembling from line number 72:
display trace disassemble_from_line_number 72 <RETURN>
273
Advertisement
Table of Contents
