Disconnecting And Reconnecting A Participant; Acknowledging Help; Sending A Message - Polycom ReadiManagerSE200 Operator's Manual

Polycom ReadiManager SE200 Operator's Guide
4–10
3 On the Manage Active Conference screen, locate the appropriate
participant and click the audio icon in that row.
4 Click Close.

Disconnecting and Reconnecting a Participant

You can disconnect and reconnect the device associated with a participant.
Disconnected rooms or participants and their devices are still associated with
the conference and are not available for other conferences.
To disconnect or reconnect a participant
1 Display the list of conferences.
2 Select the active conference you want to change and click Manage.
3 On the Manage Active Conference screen, locate the appropriate room or
participant and click the connection icon in the Status column.
4 To disconnect a location, click Remove Participant.
5 Click Close.

Acknowledging Help

Only a participant with a registered Polycom device can send a request for
help.
To acknowledge a request for help
1 Choose Monitoring > Conferences.
2 Select the appropriate conference and then click Manage.
3 On the Manage Active Conference screen, select the participant from
whom you received the request and click Acknowledge Help.
4 Click Close.

Sending a Message

You can only send a message to one or more participants with registered
Polycom devices. The message appears briefly on the monitor for the selected
video endpoint.
To send a message
1 Display the list of conferences.
2 Select the active conference you want to change and click Manage.